找传奇、传世资源到传世资源站!

ACARS解码程序

8.5玩家评分(1人评分)
下载后可评
介绍 评论 失效链接反馈

acars数据解码程序
【实例目录】acarsdec├── CMakeLists.txt
├── README.md
├── acars.c
├── acars.txt
├── acarsdec.c
├── acarsdec.h
├── air.c
├── alsa.c
├── build
│   ├── CMakeCache.txt
│   ├── CMakeFiles
│   │   ├── 3.16.1
│   │   │   ├── CMakeCCompiler.cmake
│   │   │   ├── CMakeDetermineCompilerABI_C.bin
│   │   │   ├── CMakeSystem.cmake
│   │   │   └── CompilerIdC
│   │   │       ├── CMakeCCompilerId.c
│   │   │       ├── a.out
│   │   │       └── tmp
│   │   ├── CMakeDirectoryInformation.cmake
│   │   ├── CMakeOutput.log
│   │   ├── CMakeTmp
│   │   ├── Makefile.cmake
│   │   ├── Makefile2
│   │   ├── TargetDirectories.txt
│   │   ├── acarsdec.dir
│   │   │   ├── C.includecache
│   │   │   ├── DependInfo.cmake
│   │   │   ├── acars.c.o
│   │   │   ├── acarsdec.c.o
│   │   │   ├── build.make
│   │   │   ├── cJSON.c.o
│   │   │   ├── cmake_clean.cmake
│   │   │   ├── depend.internal
│   │   │   ├── depend.make
│   │   │   ├── flags.make
│   │   │   ├── label.c.o
│   │   │   ├── link.txt
│   │   │   ├── msk.c.o
│   │   │   ├── output.c.o
│   │   │   ├── progress.make
│   │   │   └── rtl.c.o
│   │   ├── cmake.check_cache
│   │   └── progress.marks
│   ├── Makefile
│   ├── acarsdec
│   ├── cmake_install.cmake
│   ├── run.sh
│   └── scan.sh
├── cJSON.c
├── cJSON.h
├── label.c
├── msk.c
├── output.c
├── rtl.c
├── sdrplay.c
├── soundfile.c
├── syndrom.h
└── test.wav

7 directories, 52 files

/* * Copyright (c) 2015 Thierry Leconte * * * This code is free software; you can redistribute it and/or modify * it under the terms of the GNU Library General Public License version 2 * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */
#include <stdlib.h> #include <stdio.h> #include <string.h> #include <signal.h> #include <getopt.h> #include <sched.h> #include <unistd.h> #include <limits.h> #ifdef HAVE_LIBACARS #include <libacars/version.h> #endif #include "acarsdec.h" extern void build_label_filter(char *arg);
channel_t channel[MAXNBCHANNELS];unsigned int nbch;
char *idstation = NULL;int inmode = 0;int verbose = 0;int outtype = OUTTYPE_STD;int netout = NETLOG_NONE;int airflt = 0;int mdly=600;int hourly = 0;int daily = 0;
#ifdef WITH_RTL int gain = 1000;int ppm = 0;#endif #ifdef WITH_AIR int gain = 18;#endif #ifdef WITH_SDRPLAY int lnaState = 2;int GRdB = 20;int ppm = 0;#endif char *Rawaddr = NULL;char *logfilename = NULL;
static void usage(void){fprintf(stderr,"Acarsdec/acarsserv 3.5 Copyright (c) 2017 Thierry Leconte\n");#ifdef HAVE_LIBACARS fprintf(stderr, "(libacars %s)\n", LA_VERSION);#endif fprintf(stderr,"\nUsage: acarsdec [-v] [-o lv] [-t time] [-A] [-n ipaddr:port] [-l logfile [-H|-D]]");#ifdef WITH_ALSA fprintf(stderr, " -a alsapcmdevice |");#endif #ifdef WITH_SNDFILE fprintf(stderr, " -f inputwavfile |");#endif #ifdef WITH_RTL fprintf(stderr," [-g gain] [-p ppm] -r rtldevicenumber f1 [f2] ... [fN]");#endif #ifdef WITH_AIR fprintf(stderr,"[-g linearity_gain] -s f1 [f2] ... [fN]");#endif #ifdef WITH_SDRPLAY fprintf (stderr, " [-L lnaState] [-G GRdB] [-p ppm] -s f1 [f2] .. [fN]");#endif fprintf(stderr, "\n\n");fprintf(stderr, " -v\t\t\t: verbose\n");fprintf(stderr," -A\t\t\t: don't display uplink messages (ie : only aircraft messages)\n");fprintf(stderr,"\n -o lv\t\t\t: output format : 0 : no log, 1 : one line by msg, 2 : full (default) , 3 : monitor , 4 : msg JSON, 5 : route JSON\n");fprintf(stderr,"\n -t time\t\t: set forget time (TTL) in seconds for monitor mode (default=600s)\n");fprintf(stderr," -l logfile\t\t: append log messages to logfile (Default : stdout).\n");fprintf(stderr," -H\t\t\t: rotate log file once every hour\n");fprintf(stderr," -D\t\t\t: rotate log file once every day\n");fprintf(stderr," -n ipaddr:port\t\t: send acars messages to addr:port on UDP in planeplotter compatible format\n");fprintf(stderr," -N ipaddr:port\t\t: send acars messages to addr:port on UDP in acarsdec native format\n");fprintf(stderr," -j ipaddr:port\t\t: send acars messages to addr:port on UDP in acarsdec json format\n");fprintf(stderr," -i stationid\t\t: station id used in acarsdec network format.\n");fprintf(stderr," -b filter\t\t: filter output by label (ex: -b \"H1:Q0\" : only output messages with label H1 or Q0)\n\n");
#ifdef WITH_ALSA fprintf(stderr," -a alsapcmdevice\t: decode from soundcard input alsapcmdevice (ie: hw:0,0)\n");#endif #ifdef WITH_SNDFILE fprintf(stderr," -f inputwavfile\t: decode from a wav file at %d sampling rate\n",INTRATE);#endif #ifdef WITH_RTL fprintf(stderr," -g gain\t\t: set rtl preamp gain in tenth of db (ie -g 90 for 9db). By default use AGC\n");fprintf(stderr, " -p ppm\t\t\t: set rtl ppm frequency correction\n");fprintf(stderr," -r rtldevice f1 [f2]...[f%d]\t: decode from rtl dongle number or S/N rtldevice receiving at VHF frequencies f1 and optionally f2 to f%d in Mhz (ie : -r 0 131.525 131.725 131.825 )\n", MAXNBCHANNELS, MAXNBCHANNELS);#endif #ifdef WITH_AIR fprintf(stderr," -g linearity_gain\t: set linearity gain [0-21] default : 18\n");fprintf(stderr," -s f1 [f2]...[f%d]\t: decode from airspy receiving at VHF frequencies f1 and optionally f2 to f%d in Mhz (ie : -s 131.525 131.725 131.825 )\n", MAXNBCHANNELS, MAXNBCHANNELS);#endif #ifdef WITH_SDRPLAY fprintf (stderr,"-L lnaState: set the lnaState (depends on the device)\n"\ "-G Gain reducction in dB's, range 20 .. 59 (-100 is autogain)\n"\ " -s f1 [f2]...[f%d]\t: decode from sdrplay receiving at VHF frequencies f1 and optionally f2 to f%d in Mhz (ie : -s 131.525 131.725 131.825 )\n", MAXNBCHANNELS, MAXNBCHANNELS);#endif
fprintf(stderr,"\nUp to %d channels may be simultaneously decoded\n", MAXNBCHANNELS);exit(1);}
static void sighandler(int signum){fprintf(stderr, "receive signal %d exiting\n", signum);exit(1);}
#if __APPLE__
#ifndef HOST_NAME_MAX #define HOST_NAME_MAX 255 #endif
#ifndef program_invocation_name #define program_invocation_name "fastcgi" #endif
#endif
int main(int argc, char **argv){int c;int res, n;struct sigaction sigact;char sys_hostname[HOST_NAME_MAX 1];char *lblf=NULL;
gethostname(sys_hostname, sizeof(sys_hostname));idstation = strndup(sys_hostname, 32);
res = 0;while ((c = getopt(argc, argv, "HDvarfsRo:t:g:Ap:n:N:j:l:c:i:L:G:b:")) != EOF) {
switch (c) {case 'v':verbose = 1;break;case 'o':outtype = atoi(optarg);break;case 't':mdly = atoi(optarg);break;case 'b':lblf=optarg;break;#ifdef WITH_ALSA case 'a':res = initAlsa(argv, optind);inmode = 1;break;#endif #ifdef WITH_SNDFILE case 'f':res = initSoundfile(argv, optind);inmode = 2;break;#endif #ifdef WITH_RTL case 'r':res = initRtl(argv, optind);inmode = 3;break;case 'p':ppm = atoi(optarg);break;case 'g':gain = atoi(optarg);break;#endif #ifdef WITH_SDRPLAY case 's':res = initSdrplay (argv, optind);inmode = 5;break;case 'p':ppm = atoi(optarg);break;case 'L':lnaState = atoi(optarg);break;case 'G':GRdB = atoi(optarg);break;#endif #ifdef WITH_AIR case 's':res = initAirspy(argv, optind);inmode = 4;break;case 'g':gain = atoi(optarg);break;#endif case 'n':Rawaddr = optarg;netout = NETLOG_PLANEPLOTTER;break;case 'N':Rawaddr = optarg;netout = NETLOG_NATIVE;break;case 'j':Rawaddr = optarg;netout = NETLOG_JSON;break;case 'A':airflt = 1;break;case 'l':logfilename = optarg;break;case 'H':hourly = 1;break;case 'D':daily = 1;break;case 'i':free(idstation);idstation = strndup(optarg, 32);break;
default:usage();}}
if (inmode == 0) {fprintf(stderr, "Need at least one of -a|-f|-r|-R options\n");usage();}
if (res) {fprintf(stderr, "Unable to init input\n");exit(res);}
if(hourly && daily) {fprintf(stderr, "Options: -H and -D are exclusive\n");exit(1);}
build_label_filter(lblf);
res = initOutput(logfilename, Rawaddr);if (res) {fprintf(stderr, "Unable to init output\n");exit(res);}
sigact.sa_handler = sighandler;sigemptyset(&sigact.sa_mask);sigact.sa_flags = 0;sigaction(SIGINT, &sigact, NULL);sigaction(SIGTERM, &sigact, NULL);sigaction(SIGQUIT, &sigact, NULL);
for (n = 0; n < nbch; n ) {channel[n].chn = n;
res = initMsk(&(channel[n]));if (res)break;res = initAcars(&(channel[n]));if (res)break;}
if (res) {fprintf(stderr, "Unable to init internal decoders\n");exit(res);}
if (verbose)fprintf(stderr, "Decoding %d channels\n", nbch);
/* main decoding */ switch (inmode) {#ifdef WITH_ALSA case 1:res = runAlsaSample();break;#endif #ifdef WITH_SNDFILE case 2:res = runSoundfileSample();break;#endif #ifdef WITH_RTL case 3:res = runRtlSample();break;#endif #ifdef WITH_AIR case 4:res = runAirspySample();break;#endif #ifdef WITH_SDRPLAY case 5:res = runSdrplaySample ();break;#endif default:res = -1;}
for (n = 0; n < nbch; n )deinitAcars(&(channel[n]));
fprintf(stderr, "exiting ...\n");exit(res);
}

评论

发表评论必须先登陆, 您可以 登陆 或者 注册新账号 !


在线咨询: 问题反馈
客服QQ:174666394

有问题请留言,看到后及时答复